Destroyit 4005 w/ Automatic Oiler
Destroyit 4005 Centralized Office Shredder
Destroyit Centralized Office shredders are heavy-duty, high-volume machines specifically designed to shred large amounts of material daily. Ideally, they are positioned in a common area, such as next to a copier or fax, and shared by a number of employees. Centralized, "at the source" shredding is more secure and cost-effective than using an outside shredding service. Feed openings from 10 1/4 to 16 inches handle a wide range of document sizes and a variety of cutting heads are available in 6 security levels. All Centralized strip- and cross-cut models will accept staples and paper clips and many will shred CD's.
- SPS® (Safety Protection System) package: electronically controlled, transparent safety shield in the feed opening; "Easy Switch" control element uses color codes and back-lit symbols to indicate operational status; automatic reverse and power cut-off in case of paper jam; automatic power cut-off when shred bag is full or when cabinet door is opened; double protection against overheating; energy saving "sleep" mode after 1 hour of inactivity
- automatic start and stop controlled by photo cell
- "ECC" (Electronic Capacity Control) indicator helps prevent paper jams by indicating sheet capacity levels during the shredding process
- automatic oil injection insures optimal performance at all times
- wide, 16" feed opening
- high quality, hardened steel cutting shafts take staples, paper clips, credit cards, and CDs
- lifetime warranty on cutting shafts
- quiet and powerful single phase motor rated for continuous operation
- durable gears enclosed in dust-proof housing
- high quality wooden cabinet mounted on casters
- pull-out bag frame mechanism mounted on rollers for easy replacement of disposable shred bags
- 59 gallon bin capacity (approximate)
Destroyit 4005 with automatic oiler |
strip-cut |
cross-cut |
Shred size |
1/4"
(6 mm) |
3/16" x 1 1/2"
(4 x 40 mm) |
Sheet capacity |
50-52* |
30-32* |
Shred speed |
40 ft./min. |
30 ft./min. |
Security level |
2 |
3 |
Shipping weight |
343 lbs. |
378 lbs. |
Both models |
|
Feed opening |
16" |
Max. horsepower |
2 1/8 |
Motor output |
1.6 KW |
Electrical requirements |
115 V¹ |
Dimensions (D x W x H) |
23 1/4 x 25 1/4 x 39 1/4 inches |
*may vary due to variations in paper and power supply¹20 amp. dedicated line required |
© 1984 - 2019 EOE Group Inc. All rights reserved. Terms of Use | Privacy Policy